The pull trigger protection switch is used for converting dip switch on the circuit, belonging to the core control device of circuit switching. The pull trigger protection switch is widely used in various types of aircraft cockpit, cabin or other necessary human control panel and other key control panel. We adopt the international mainstream lock form; each pulling direction is provided with the locking and unlocking effect. The pull trigger protection switch can be operated by pulling the switch, the locked position only can be unlocked by pulling along the axial direction.
Pull trigger switch
Pull trigger switch
Overview
MLK-3T
Function
These products are sealing pull trigger switch series. They can be used in sorts of locking operation occasions. They can be correctly converted to switch on the circuit, located on the right action, contacted reliably, without blocking and sticking phenomenon; Switch can be locked or unlocked in each pulling directions; Switch can be triggered from one position to another, it can be converted from locked to unlocked only by pulling the handle along axis direction; Pulling ways for different locked types are different.
Structural characteristics
- Three - pole position switch
- Standard trigger operation and pulled to unlocked
- Pulling handle for 3mm to be unlocked
- For 9 types of locked status
- Applying the sphere of cap, sliding mortar, sphere of lever, groove of upper shell (the coordinator of sliding mortar and lever), and coordinator of bracket and contact strip with thin coat of special 221 grease before assembly.
- After the contact action, the free travel of the handle is no less than 5%d (both sides).
- Logo is printed directly by laser printer shown in the graph, with depth of print no less than 0.3mm, and coated white nitro exterior enamel H04-2 after printing.
Tech Spec
- circuit voltage: 27±2.7VDC
- environment operating temperature: -55℃～+70℃
- pulling power of handle: 4.9 N ~ 24.5N
- pulling angle of handle: 60°±4°
- mechanical lifting lifetime: 20000 times
- storage: 3 years
- weight ：Weight (without lock) Weight (with lock)
- conversion current: 0.1A ~ 15A in resistive load; 0.1A ~ 7A in the inductive load τ≤0.015.
- lifting power of handle: 13.3N ~ 22.2N
- electrical lifetime: 15000 times.
- sealing requirements: can prevent effectively dust and moisture into shell inside.
- guarantee: 600 - 2 years of flying hours
Naming rules
